FULL SWING-OUT TAILGATE

PART # BRCPR900-FSOT

Another Cryptocage exclusive.  Our Full Swing-out Tailgate replaces the factory tailgate and helps you utilize much needed space.  The center section swings open to allow easier entry into the bed and when our Fold-up Jump Seats are used. Our optional Spare Tire mount bolts-up to the slotted rungs designed into the tailgate within minutes.  This is the perfect compliment to the Accessory Rack.

​*Spare Tire Mount shown is optional

Tailgate $399.00 USD + Shipping & Handling

Spare Tire Mount $239.00 USD + Shipping & Handling


ACCESSORY RACK

PART # BRCPR900-AR

The Cryptocage Accessory Rack is an Industry exclusive.  The Accessory Rack Kit bolts to an existing plate and existing bolt holes included in the Roof and rear upright supports of the Basic Roll Cage.  This modular design means you can add the Accessory Rack now or in the future as your budget allows.  Add Rotopax gas cans, Quick-Fist mounts, Kolpin gun racks or other brand name accessories to the Accessory Rack with little to no modification.  This gives you the freedom to make your Ranger your own unique tool for work or play. Use with the stock tailgate or our Full Swing-out Tailgate

$379.00USD + Shipping & Handling


      Optional Accessories:

  • .080 thick Aluminum Roof +$259.00
  • 1/8" thick Diamond Plate Roof +$359.00
  • Accessory Racks + $369.00
  • Safari Rack + 379.00
  • See all other options below on this page

REAR BUMPER

PART # BRCPR900-RB

The Rear Bumper is a great compliment to the Full Swing-Out Tailgate and acts as a step when entering the bed.

$199.00 USD + Shipping & Handling


Click on photos to enlarge

Click on photos to enlarge

ALUMINUM POWDER COAT ROOF

PART # BRCP900-BPCAR

.080 thick aluminum powder coated in a textured flat black. Easily bolts up to the BASIC ROLL CAGE for a little shade on hot days and also doubles as the floor of the optional Safari Rack.


$259.00 USD+ Shipping & Handling

SAFARI RACK2

PART # BRCPR900-SR2

Add much needed storage capacity with our heavy duty Safari Rack2.  The easy installation method utilizes the same holes spacing as the Aluminum Powder Coat roof and bolts right up to the Basic Roll Cage's integrated roof tabs.  Cut-outs in the Rack allow you to add up to 8-Flush Mount LED Pod lights to the sides, rear corners and back of the Safari Rack2. If you do not intend to add lights we can supply the optional X-Cover Plates to cover the light cut-outs. Horizontal slotted Holes also make it easy to adapt a Hi-Lift UTV jack, axes, shovels or use as Tie-Down holes.   

*The Safari Rack2 requires an optional Aluminum Powder Coat or Diamond Plate Roof. Light Cut-out fits Rigid brand. Custom cutouts can be offered for your lights with cut out template. 

​​$399.00 USD + Shipping & Handling

X-Cover Plates$5.00 per set of 2

Click on photos to enlarge

For ordering information, package discounts, multiple unit discounts, freight estimates and lead-times please contact us at:  801-865-7647 or sales@cryptocage.com.  All of our Roll Cage products are build to order, we focus on low volume and high quality. Due to large/heavy crating, freight cost variables depending on region, and the custom & complex nature of our Roll Cage products orders can only be processed by phone.

YETI BASIC ROLL CAGE EXTENSION  FOR POLARIS RANGER 570 FULLSIZE, 800, XP900 & XP1000  

PART # YBRCPR900

The Cryptocage Yeti Basic Roll Cage Extension is the cornerstone of what makes our products great.  It was designed with great attention to detail to match the contours and styling of the Ranger body style. We are confident you will agree that our Cage improves the overall ascetics of the Ranger 900XP and 1000XP. Design Features include: 2" diameter steel tubing, custom fit, a unique installation method that bolts all the way through the factory stake pockets with additional brackets that mount to the factory cage for a rock solid installation.  Utilizing the bed's tilt feature is still possible by removing two easily accessible bolts on the cab. We also incorporate 12 mounting tabs around the top tubing to easily bolt-on the optional Aluminum Powder Coat Roof and/or Safari rack.  Also includes built-in provisions to add our optional accessory rack and a threaded sleeve in the center roof cross member support to add our optional Spare Tire mount.


$1239.00 USD+ Shipping & Handling

YETI ROLL CAGE & SEAT PACKAGE​​PART #YBRCSPPR900​​

Included in the Promotional Package is the Basic Roll Cage, 52" Bench Seat with removable Seat Bracket and 3-Lap belts. The Seat and Seat Bracket can quickly be removed by un-bolting four (4) easily accessible 1/2" grade 8 hex head bolts.  The Bracket is removed with the Bench Seat leaving the bed wide open and unobstructed. We are confident that with our fit, finish, styling and convenience features, this is the best value for a Roll Cage Extension and Seat package on the market today.

*Aluminum Powder Coat Roof Shown in picture is optional

​​$1799.00USD + Shipping & Handling


Click on photos to enlarge

SPARE TIRE MOUNT FOR ROOF
PART # RSTMPR900
The Roof Spare Tire Mount uses the same anchor method as the Full Swing-Out Tailgate except it does not have the mounting plate.The Roof version will screw into a threaded sleeve included in the Basic Roll Cage Extensions center cross Member.
$154.00 USD + Shipping & Handling

Call: 801-865-7647

Click on photos to enlarge

Click on photos to enlarge

Click on photos to enlarge

* ORDERS USUALLY SHIP IN 4-5 WEEKS *

POLARIS RANGER XP900 AND 1000

Contact Us

Click on photos to enlarge

CLICK ON PHOTO TO ENLARGE

HI-LIFT UTV JACK MOUNT

PART # BRCPR900-HLUTVJM

Designed specifically for the Hi-Lift brand UTV Jack, our Jack Mount provides a convenient location to store your jack on the rear of our Safari Rack, and out of the way.

$109.00 USD + Shipping & Handling

Click on photos to enlarge

SPARE TIRE MOUNT FOR FULL SWING-OUT TAILGATE

PART # STMPR900

The rear Spare Tire mount bolts right up to the Full Swing-Out Tailgate with a 5/16" carriage bolt.  The handle also

includes a built in Lug Wrench.

$239.00 USD + Shipping & Handling




REAR ACCESSORY BAR

Part # BRCPR900-RACB

The Rear Accessory Crossbar provides several functions.  It adds more strength to the rear of the Roll Cage Extension, it also adds a place to wrap 3 or 4 point harnesses, and allows the possibility to add other non Cryptocage accessories such as Cooler Racks, or other items utilizing Cage Clamps.  Made from 1 3/4" tubing and cage clamps it easily installs to our the Basic Roll Cage Extension.

$129.00  USD + Shipping & Handling

BIGGOOT ROLL CAGE EXTENSION

PART # BFRCPR900

Same Roll Cage as the Yeti just beefed-up with the addition of extra roof supports.  Make it a walk-on roof when used with the Heavy Duty 1/8" diamond plate roof (sold separately). 


*The Accessory Rack shown in the picture is sold separately.


​​​​$1399.00 USD + Shipping & Handling

Package includes:

  • Yeti Roll Cage Extension
  • Black 52" Wide Bench Seat
  • Removable Seat Bracket
  • 3 Lap Belts

Options:

  • 4pt Harness +$55.00 per belt
  • .080 thick Aluminum Roof +$259.00
  • 1/8" thick Diamond Plate Roof +$359.00
  • ​Custom PRP seats (call for details & pricing)
  • See all other options below on this page

HEAVY DUTY 1/8" DIAMOND PLATE ROOF, BLACK TEXTURED POWDER COAT

PART # HDDPRPR900

Add extra strength and style to the YETI or BIGFOOT Roll Cages.

$359.00USD + Shipping & Handling

Click on photos to enlarge

Click on photos to enlarge